|

English
Français
русский язык 
Español

Product Category

Geophysical Exploration,
Logging and Well Testing Equipment

Drilling and Workover Equipment

Production Equipment

Oilfield Surface Facilities

Tubular Goods

Oilfield Chemicals

General Product

Refining and Chemical Equipment

Chemical Products

Catalyst and Additive

Offshore Engineering

Epidemic Prevention Materials

#
  • #
#

Stratigraphic Dipmeter Tool

Brief Introduction:

SSDT is used to detect the spatial position of formation interface in open hole wells. Based on the geometric principle of one side determined by three points，the difference of depth of the same stratum layer is measured.

Using micro-focus resistivity method, the polar plates are attached to the borehole wall to measure the formation conductivity along the borehole wall.  

Index Number

Product Code

Material Code

Name

Type

Maximum Temperature 

Maximum Pressure

Outer Diameter

Length

Weight

Measure Range

Measure Accuracy

Sonde Thrust

Logging Speed

1

37020206

1000089533

Stratigraphic Dipmeter Tool

SSDT5560

155℃

100Mpa

90mm（127mm）

9066mm

218kg 

Deviation Angle:0°～90°
Azimuth:0°～360°
Caliper:153 mm～533 mm
Six-channel Conductivity：0.2 Ω•m～1 000 Ω•m

Deviation Angle:
             when 0°≤DEV＜3°时，±0.4°
             when 3°≤DEV≤90°时，±0.2°
Azimuth Angle：±4°
Caliper：±7.6 mm（±0.3 in）
Six-channel Conductivity：＜15%

When the caliper is less than 250 mm, the thrust is greater than 0.3 kN.
When the caliper is greater than 250 mm, the thrust is greater than 0.3 kN.

500 m/h

#